"Roland Schoen" wrote:

> Hi David,
>
> i read the article of the URL you sent me. I enabled RUS logging and tired
> to check for errors. But i had only informational log events, and no critical
> erros on RUS.
>
> I was waitig more than 24 hours for RUS to stamp a user object. But it
> didn't happen.
> I was also checking if there are some inconsistencies between exchange and
> domaincontrollers (eg. time difference to big). But nothing at all was
> present.
>
> After i triggered the RUS manually to do an update, then unstamped objects
> were
> stamped again. I also tested if the RUS stamps new objects wich also works
> again.
>
> I'm really a little bit confused why the RUS stops working immediately, but
> some collegaues told me, that they had this problem also, and they resolved
> it with reboots of DC and Exchange. But in my case this didn't help.
>
> I'll read a little bit more about RUS. Probably i find out why it stops
> working.
>
> --
> regards from Germany
> Schoen, Roland
> ---------------------------
> [Systemadministrator]
>
>
>
> "David Ruth" wrote:
>
> > Hi Roland,
> >
> > I assume you've given it some time and the RUS still hasn't stamped the
> > addresses on the AD object in question.
> >
> > Here is a link to troubleshooting the RUS.  Every Exchange oriented site has
> > one of their own. 
> > http://msexchangeteam.com/archive/2004/07/07/175444.aspx
> >
> > Generally the addresses won't appear immediately in ADUC but it shouldn't
> > take > 15 minutes by default. 
> >
> > You won't find an error in the Exchange logs because nothing failed there. 
> > The RUS hasn't stamped the object yet.  The question is why not.  Start
> > troubleshooting with the RUS. 
> >
> > Oh...  Send an email to the new smtp address (the one that isn't there yet)
> > to kick things off if you're impatient!
> >
> > Regards to Germany,
> > David
> >
> >
> > "Roland Schoen" wrote:
> >
> > > Hello Newsgroup,
> > >
> > > i have a frigthening problem, really.
> > > If i create a new User with the Active Directory console (wich is delivered
> > > with the Exchange installation) i activate the checkbox to create a mailbox
> > > for the new user.
> > >
> > > The curious thing is, all exchange tabs, at user properties will be created,
> > > but there is no X400 and smtp adrress created for the user during the
> > > process.  And the Exchange wizard returned a success message for the mailbox
> > > creation.
> > >
> > > A look in to the Mailboxstore, was also negative - No mailbox available. And
> > > the System and Application event log is also clean.
> > >
> > > I really don't know whats going on there. Hope you got some tips for me...
> > >
> > > --
> > > regards from Germany
> > > Schoen, Roland
> > > ---------------------------
> > > [Systemadministrator]
> > >

"mor1980" wrote:

> I am facing the same problem and unfortunately I have not found any solutions
> from internet so far. Can you help me please
>
> "Roland Schoen" wrote:
>
> > Hi David,
> >
> > i read the article of the URL you sent me. I enabled RUS logging and tired
> > to check for errors. But i had only informational log events, and no critical
> > erros on RUS.
> >
> > I was waitig more than 24 hours for RUS to stamp a user object. But it
> > didn't happen.
> > I was also checking if there are some inconsistencies between exchange and
> > domaincontrollers (eg. time difference to big). But nothing at all was
> > present.
> >
> > After i triggered the RUS manually to do an update, then unstamped objects
> > were
> > stamped again. I also tested if the RUS stamps new objects wich also works
> > again.
> >
> > I'm really a little bit confused why the RUS stops working immediately, but
> > some collegaues told me, that they had this problem also, and they resolved
> > it with reboots of DC and Exchange. But in my case this didn't help.
> >
> > I'll read a little bit more about RUS. Probably i find out why it stops
> > working.
> >
> > --
> > regards from Germany
> > Schoen, Roland
> > ---------------------------
> > [Systemadministrator]
> >
> >
> >
> > "David Ruth" wrote:
> >
> > > Hi Roland,
> > >
> > > I assume you've given it some time and the RUS still hasn't stamped the
> > > addresses on the AD object in question.
> > >
> > > Here is a link to troubleshooting the RUS.  Every Exchange oriented site has
> > > one of their own. 
> > > http://msexchangeteam.com/archive/2004/07/07/175444.aspx
> > >
> > > Generally the addresses won't appear immediately in ADUC but it shouldn't
> > > take > 15 minutes by default. 
> > >
> > > You won't find an error in the Exchange logs because nothing failed there. 
> > > The RUS hasn't stamped the object yet.  The question is why not.  Start
> > > troubleshooting with the RUS. 
> > >
> > > Oh...  Send an email to the new smtp address (the one that isn't there yet)
> > > to kick things off if you're impatient!
> > >
> > > Regards to Germany,
> > > David
> > >
> > >
> > > "Roland Schoen" wrote:
> > >
> > > > Hello Newsgroup,
> > > >
> > > > i have a frigthening problem, really.
> > > > If i create a new User with the Active Directory console (wich is delivered
> > > > with the Exchange installation) i activate the checkbox to create a mailbox
> > > > for the new user.
> > > >
> > > > The curious thing is, all exchange tabs, at user properties will be created,
> > > > but there is no X400 and smtp adrress created for the user during the
> > > > process.  And the Exchange wizard returned a success message for the mailbox
> > > > creation.
> > > >
> > > > A look in to the Mailboxstore, was also negative - No mailbox available. And
> > > > the System and Application event log is also clean.
> > > >
> > > > I really don't know whats going on there. Hope you got some tips for me...
> > > >
> > > > --
> > > > regards from Germany
> > > > Schoen, Roland
> > > > ---------------------------
> > > > [Systemadministrator]
> > > >