Exchange Newsgroups: Exchange Server General Discussion

how to remove offline exchange server from Exchange Sytem Manager

POP3 Configuration in Front end/back end - 27 Jan 2007 10:39 AM - 2 messages

hi, we have windows 2003 DC & Exchange 2003 with Active /passive cluster, i have some server with exchange 2003 in Exchange System manager but this some servers not in my LAN & subnet, these are very old servers not avilable ...

KB926666 Problem

Peter [Edu] - 27 Jan 2007 12:16 AM - 4 messages

Yesterday I updated our Exch 2003 SP2 server with KB926666. After the reboot the store service would run but refused to mount any of the Mail or Public stores. The event log showed Event 9519/9518 errors with the data "Failed to ...

Best way to backup Exchange 2003?

Anthony Smith - 26 Jan 2007 7:30 PM - 1 message

Good Afternoon, We're using SBS2003. I'd like to know the best recommended way to back up Exchange 2003. We are using public folders also. Is the WinNT Backup program ok? Should I stop the Exchange Services so that I get all the ...

Best way to backup Exchange 2003?

Anthony Smith - 26 Jan 2007 7:30 PM - 3 messages

Good Afternoon, We're using SBS2003. I'd like to know the best recommended way to back up Exchange 2003. We are using public folders also. Is the WinNT Backup program ok? Should I stop the Exchange Services so that I get all the ...

Migrating DBs from SAN to another SAN

German Suazo - 26 Jan 2007 6:14 PM - 5 messages

Hello! I would like to know some suggestions about how to move exchange databases that are in one SAN to a new SAN. We have an Exchange Cluster in Active/Passiveconfiguration with 2 nodes, and we have aquired a new Storage solution (SAN), and we want to move Exchange ...

Message to System Attendant

BobS - 26 Jan 2007 5:19 PM - 1 message

A couple of the users at one of my accounts notified me that they had been getting NDRs for messages sent to the System Attendant. Of course these are messages that "they" did not send but they are looking for an answer, (and ...

Exchange 5.5 email export tool

Seanh - 26 Jan 2007 4:01 PM - 2 messages

Is anyone aware any 3rd party tools to extract emails from Excnage 5.5 (Exmerge has a low ratio of success)... mailmig doesn't work either. This is for an intra migration/export. Thank you, ...

can't send mails using Exchange 2003

CS - 26 Jan 2007 5:05 AM - 4 messages

Hi, I have SBS 2003 server with Exchange Server 2003 configured to get mails from CatchALL mailbox hosted at ISP using POP3 Connector. Now, we have 2 users who are using ISP POP3 service to send and recieve mails and rest ...

exchangeperflog*.dat files in temp folder

freddo - 26 Jan 2007 2:50 AM - 3 messages

'I am running exchange as part of sbs2003 and on only one users xp/sp2 pc I am getting a hundred files a day appearing in their c:/document and settings/../local settings/temp/ folder files called exchangeperflog*.dat. I ...

Exchange Mailboxes

Jacquelyn - 26 Jan 2007 2:39 AM - 2 messages

How can you disable users from having access to other users mailboxes in the File, Open, Other Users Folders? Big problem we need to fix fast!!! Thank you. ...

HTTP 440 Login Timeout

Fui Fan - 26 Jan 2007 1:30 AM - 1 message

Hi all, I setup a brand new Exchange 2007, all CAS/Mailbox/Hub in single box. The OWA was working before but now i encounter 440 Login Timeout. I search through web and found article saying is permission issue, i check all i could ...

HTTP Error 404 in OWA Public Folders

Oseas Millan - 25 Jan 2007 11:01 PM - 3 messages

Hi We are using Exchange 2003 on a Server 2003 domain controller. Outlook web access had been working fine. Recently we discovered that when we try to access public folders through OWA we receive a "Page cannot be found" error. It is HTTP Error 404 - File or ...

Best Practices for MS Exchange server

soupy66 - 25 Jan 2007 8:21 PM - 1 message

I need to find a site for Best Practices for Microsoft Exchange Server. So far I haven't found much I can use. I'm looking mostly for Mailbox size, mailbox stores, Archiving. I found one for public folders and offline cache. ...

Deleted/Recreated email account not working

Toluene - 25 Jan 2007 7:24 PM - 3 messages

An email account was deleted. The address was added to a different email account so that they received it with their mail. At the client we were unable to create a rule that would seperate the mail into a seperate folder ...

PF and NNTP

Ferg - 25 Jan 2007 6:44 PM - 2 messages

Hi Folks, I need some pointers on the following - I have E2003 SP2and just moved to another server and we use NNTP to point to Public Folders and after replication - some of the content is not displaying in the NNTP Outlook Express client - ...

Encrypt data between Microsoft Office Outlook and Microsoft Exchan

exgwill - 25 Jan 2007 6:36 PM - 1 message

hi,,, I know this is possible manually through the following on Outlook 2003 Tools --> E-mail Accounts --> View or Change existing e-mail accounts --> change --> more settings --> security --> encryption --> check "Encrypt data ...

How do I remove 'Log Off' from OWA?

Me - 25 Jan 2007 6:01 PM - 1 message

Hi all. We have a portal where people can access their OWA as one of our Web parts. We want people to use only the Portal's Log Off functionality, not OWA's in the Web Part. How do we remove the Log Off from the OWA (2003)? ...

E-mail aliases

Kathy - 25 Jan 2007 6:01 PM - 3 messages

We are running Exchange2003 on Server2003. We have a new domain registered and would like some of our users to be able to use it for their e-mail return address. When I added that SMTP ...

OWA problems in Ex2003

kjsubbu@gmail.com - 25 Jan 2007 4:24 PM - 1 message

I recently facced one problem in ex2003 with sp2 server.I have updated the recent ex2003 security update 926666. After installing the security patch i had one problem Am able to login to OWA with my credentails and am able to get my ...

Redirect specific emails to specific user

jkendrick75 - 25 Jan 2007 2:16 PM - 5 messages

I am using exchange 5.5 and would like to know how to redirect email with a specific subject line that is going to all server recipients to only go to my email inbox. In other words, all emails with say "Spam Report" in the ...

using isa to block smtp to apnic

tt - 25 Jan 2007 1:30 PM - 1 message

Can Apnic and RIPE be blocked in ISA so that there is no access to or from exchange or anything anywhere on network? Mainly I don't want exchange to be able to send any email rejects or such like to anything even related to ...

Re: husain - groovy newsgroup access - lospe vom buglu - (1/1)

Lanwench [MVP - Exchange] - 25 Jan 2007 1:07 AM - 1 message

In jerry <indexn***@batitinan.biz> typed: <snip> Reported to abuse. ----------------------------------- Subject: attn: husain - groovy newsgroup access - lospe vom buglu - (1/1) From: jerry <indexn***@batitinan.biz> Newsgroups: microsoft.public.exchange.misc Message-ID: <648737k627569352t423816G327323l82873j63285314F27178***@news.batitinan.biz> ...

sbs 2003 exchange error

teknics100 - 24 Jan 2007 11:45 PM - 1 message

Hi, i cannot get into the exchange console to ammend details etc. I can open the ESM but when i try to veiw queue's or re-enable out-going mail i receive the same error message: ACCESS DENIED EXCHANGE ...

POP3 Connector/Categorizer issues

Grant - 24 Jan 2007 7:03 PM - 2 messages

Hello, We are currently using a Small Business Server 2003 with the Exchange POP3 Connector. The connector is picking up the mail without any trouble and then the messages just vanish. When I check track the messages with the Message ...

burn personal.pst file into a CD

C C - 24 Jan 2007 6:45 PM - 5 messages

I tried to burn my 2005 personal.pst file for archiving into a CD. But when I tried to open it, Outlook 2003 gives me an "Access denied" due to permission! Is there a workaround this? Does a .pst file have to be in a ...

Restore mail box in Exchange 2003

Aby - 24 Jan 2007 5:16 PM - 2 messages

How to restore or back up individual mail boxes from a common the store ( ie. mailbox.edb and mailbox.stm.) ...

Exchange 2003 - Mail box- Last logon by

Aby - 24 Jan 2007 5:11 PM - 5 messages

Why it shows NT AUTHORITY / SYSTEM instead og Doamin name / user name. Any problems. ...

RPC over HTTP

DavidK - 24 Jan 2007 5:04 PM - 4 messages

I am having trouble implementing this. I have the tech notes and some trouble shooting guides. I ma having trouble at the CA level. I am not sure what this is or how to use it. I understand the concept, but the specifics are giving me trouble. ...

Move mailbox and MOM Alert

Transam388 - 24 Jan 2007 4:26 PM - 1 message

I had set up a MOM 2005 alert to notify me when a mailbox is moved to our Exchange 2003 server. I created this in the Exchange 2003\Exchange System Monitoring\System Attendant rule set in MOM. It just looks for a certain ...

Exchange Queue Problems!!

jasonconstance - 24 Jan 2007 3:25 PM - 7 messages

Started experiencing some strange problems recently. To make things more clear, let me first explain our setup: I'm the network admin at a small university. We have two domains here, xxx.edu and xxx.com. One is for students, the other for faculty and ...

Exchange Queue Problems!!

jasonconstance - 24 Jan 2007 3:24 PM - 1 message

Started experiencing some strange problems recently. To make things more clear, let me first explain our setup: I'm the network admin at a small university. We have two domains here, xxx.edu and xxx.com. One is for students, the other for faculty and ...

Welcome mail in exchange 2003

kjsubbu@gmail.com - 24 Jan 2007 7:29 AM - 1 message

Hi, I have one small doubt. How to configure when i registered any user in my exchange server I want to create an email congratulatory message for new users that includes a description of our IT system, services, user abilities and ...

Cannot see my Outlook web mail page

steve - 24 Jan 2007 3:25 AM - 11 messages

I have been trying to set up a linux computer (SME 7) in front of an exchange server. I have tryed to port forward, from linux outside ip to inside ip, to no avail. I have also tryed a program called proxypass that forwards an ...

Filtering Spam at the Server Level

Chaplain Doug - 23 Jan 2007 10:27 PM - 9 messages

Exchange Server 2003. I plan to use Exchange server to server the mail for all of our personnel inside and outside our headquarters. Right now everyone is complaining about spam. I have given SpamBayes to those who are using ...

Exchange 2003 forward email to multiple addresses

Lito Kusnadi - 23 Jan 2007 10:21 PM - 3 messages

Hi, Anyone knows how to forward email that arrives on 1 address to multiple recepient? I have an inbox for system admin purpose where emails arrive in that mailbox will be forwarded directly to 3 emails. Both the system admin and the 3 ...

Exchange send and receive limit question

Terry Ball - 23 Jan 2007 3:41 PM - 6 messages

We are using Exchange 2003 on Windows Server 2003 I have 2 separate mailbox stores One store is for calendaring only and the other is for email The calendaring store we set the send and receive limit to 6K. Management thinks this will help stop viruses. ...

Exchange Server 2003 Stress and Performance Tool (ESP/MEDUSA)

Artie - 23 Jan 2007 2:50 PM - 2 messages

Good morning, I have been trying to use the ESP tool to determine the actual load our Exchange front-end servers can sustain (number of concurrent sessions), but I am having a few issues within the sample scripts provided with the tool ...

Global Address List verse All Users List

Rory - 23 Jan 2007 2:26 PM - 3 messages

Running E2.3 SP2. Outlook running Cache Mode. 10 days ago I made changes to a display name in AD. The changes do not appear in the Global Address Book via Outlook but I can see them if I select the All Users Lists. I ran a ...

Inetinfo.exe crashes randomly - IISReset seems to be the only cure

d3m0n - 23 Jan 2007 1:54 PM - 4 messages

Hi All :) First post here, so here goes... Just before Christmas, we started having an issue where the Inetinfo.exe crashes for no apparent reason, taking with it various Exchange-related services (IMAP4, etc). As a result, mail begins to queue in the "Messages ...

create mail enabled conatcts from a 5.5 system?

Chris D - 23 Jan 2007 11:45 AM - 3 messages

Is it possible to extract user info from 5.5 and use something like csvde or ldidfe to import to AD2003? I need to do it this way as I still have 2 sites on 5.5 which we forward ...

Trendmicro antivirus and Exchange

Gianluca - 23 Jan 2007 8:50 AM - 4 messages

Hello All, we're considering to get in out company trendmicro scanmail. Is there anyone already using it that can give me a feedback? I'm testing it in a demo environment but the only success now is that all email are lost :-) Seems to be submitted to advanced queue in ...

Is the Edge Transport server required?

Theodore Lim - 23 Jan 2007 5:12 AM - 3 messages

We are currently using Lotus Domino and will be migrating to Exchange soon. I am puzzled with the need for an Edge Transport server in Exchange 2007. Is this server role required to run Exchange within a private IP-VPN where mail ...

HTML Attachment corrupted in OWA but not Outlook

Cordata - 23 Jan 2007 12:58 AM - 3 messages

I'm running an Exchange 2003 Standard server and offer my users Outlook or OWA access to their email. Recently, some of my users have been complaining about HTML file attachments that won't open or save properly from OWA, but work fine ...

Setting up meeting reminders in Exchange 2003

LincolnIT - 23 Jan 2007 12:19 AM - 2 messages

Exchange 2003, Company Calendar under Public Folders, users have access to the calendar. How do I properly set up meetings so that reminders alert the users of scheduled meetings? Right now what happens is I get an error: "The reminder for "(appointment)" will not appear because the item is not in ...

Generate list of all Primary SMTP addresses

BSUMelissa - 22 Jan 2007 7:00 PM - 5 messages

Is there a way to generate a list, either using Exchange System Manager or through AD, of all the primary SMTP addresses? I vaguely remember being able to get this info from 5.5 by exporting a csv file but now I can't seem to ...

Exchange Newbie Questions

supersonic_oasis - 22 Jan 2007 6:01 PM - 3 messages

My company is moving form Sendmail to Exchange 2007. I am currently reading a book entitled Exchange 2007 unleashed. I have run into the following terms: * Data Stores * Mailbox Stores * Storage groups * EDB database However, it doesn't really explain what these things are, or the difference ...

Exchange server's WAN address? The one needed to enter in Outlook?

David K - 22 Jan 2007 5:46 PM - 6 messages

Hi, I have just set up Exchange 2003 (w/ SP2) and can send and receive mails fine (Using NTL smarthost, mindyou.) but that is only from my LAN. The only way I can access the server in Outlook 2003 is to type the LAN IP of the ...

1 of 30 rules stop working after a while

Enrico Aramini - 22 Jan 2007 4:27 PM - 2 messages

I've a strange rules behaviour. I've an Exchange Srv 2003 sp 2 and Outlook 2003 sp 1. I insert 30 server side rules to process incoming e-mail. Just after I've saved them they work exactly as designed. The day after if I open ...

identity of spam sender in logs

tt - 22 Jan 2007 1:35 PM - 4 messages

Can or perhaps I should say, will Exchange 2003 sp2 email logs show the real sender of spam or just who it will sent to when refused.? ...

Exchange Server version

ratman and bobbin - 22 Jan 2007 8:41 AM - 12 messages

I have almost completed an evaluation of SBS 2003/Exchange 2003 with a client. There are a few remaining tests to be done but essentially completed and looking to purchase within a month. I am concerned that with the advent ...

Am I hacked ?

Len B - 22 Jan 2007 2:20 AM - 9 messages

I hope I am posting in the right place. SBS 2003. Server Usage Report arrives showing one user having sent 202 external messages in 14 days. User says she sent only 16 legitimate external messages during the period according to her Sent Items folder. ...